TVLogic LVM-095W-N - Manual (Page 25)

Multi Format LCD Monitor 25
6. Button Functions
[2] HDMI Button [1] SDI Button
• LVM-095W unit is capable of processing
dual SDI Input signal.
1. Press the[SDI] button on the front of the
monitor and activate the OSD menu as
shown on the below.
2. Input resolution displays on the bottom of
the OSD screen.
3. Press the [SDI] button again to remove the
OSD menu from display.
* If no image displays after selecting the
desired input mode, check and make sure that
your connection is not lose or disconnected.
• LVM-095W unit is capable of processing
Single HDMI Input signal.
1. Press the [HDMI] button on the front of the
monitor and activate the OSD menu as
shown on the below.
2. Input resolution displays on the bottom of
the OSD screen.
* If no image displays after selecting the
desired input mode, check and make sure that
your connection is not lose or disconnected.