TVLogic LVM-095W-N - Manual (Page 12)

12 Multi Format LCD Monitor
5. Menu Operations
[1] Picture
• Brightness
- Used to set the brightness(=offset) level from
-100 to 100.
* Brightness can be adjusted by using [BRIGHT]
control knob on the front of the monitor.
• Contrast
- Used to set the contrast(gain) level from -100
to 100.
* Contrast can be adjusted by using [CONTRAST]
control knob on the front of the monitor.
• Chroma
- Used to set the saturation level from -50 to 50.
* Chroma can be adjusted by using [CHROMA]
control knob on the front of the monitor.
• Phase
- This function is not supported since the LVM-
095W doesn’t support Analog input signal.
• Aperture
- Used to set the sharpness level from -12 to 12.
* Aperture can be adjusted by using [Aperture]
control knob on the front of the monitor.
• NTSC Setup
- This function is not supported since the LVM-
095W doesn’t support Analog input signal.
• Knob Lock
- Locks the Knob control Knob(Aperture,
Bright, Chroma, Contrast, Volume).