Controls & functions, Lvm-095w : rear – TVLogic LVM-095W-N User Manual
Page 10

10 Multi Format LCD Monitor
DC IN
socket
1: GND
4: +12V/
+24V
1
2
3
4
LVM-095W : REAR
3. Controls & Functions
• TALLY(LAMP)
- Interlocks with front tally lamp.
• SDI-A/SDI-B (BNC)
- HD/SD SDI signal input terminal for SDI A/ SDI
B signal.
• SDI-OUT (BNC)
- HD/SD-SDI signal output terminal for SDI
signal.
• AUDIO IN (Phone jack)
- Internal speakers stereo audio input terminal.
• AUDIO OUT (phone jack)
- Built in audio disembedder and internal
speakers stereo audio output.
• USB
- This terminal is used to upgrade the firmware
or color calibration made by TVLogic.
• REMOTE (RJ-45)
- Provides connection to control equipment for
external monitor control.
- Features can be changed in the REMOTE
section of OSD menu.
• DC IN (XLR, 4 pins)
- DC power input terminal for DC 12V/24V.
* When using a DC Adapter other than the one
supplied by the manufacturer, please be
advised that the adapter with DC 12V/3A ~ 6A
can be compatible with the monitor.
< Warning >
When using the product make sure to ground,
whenever possible, before connecting the
input signal cable in order to prevent any
possible damage to the product or connected
devices. The damage may include signal noise,
malfunction of main board or display panel.
And the connected devices such as camera
or video source player may also be influenced
through signal cable. Please check if the AC
power source and the power extender or
power distributor is grounded.