TVLogic LQM-071W - Manual (Page 21)

7” I
nt
eg
ra
te
d m
ul
ti f
orma
t HD Q
uad in
pu
t mo
ni
to
rs
21
LQM-071W
OSD Menu Contents
4) AUDIO GROUP
- Application : For each input channel.
- Value Range : “GR1” , “GR2” , “GR3” , “GR4”
- Default Value : “GR1”
- Function : Selects the embedded Audio Group of each display input. Selected Audio Group is used
for the Audio Level Meter display and Embedded Audio Group for the audio output.
5) AUDIO OUT SEL
- Application : For all available inputs.
- Value Range : “OFF” , “CH1 G? C12” , “CH1 G? C34” , “CH2 G? C12” , “CH2 G? C34” , “CH3 G? C12” ,
“CH3 G? C34” , “CH4 G? C12” , “CH4 G? C34”
- Default Value : “OFF”
- Function : Selects the input source to use with the built-in speaker.
To select the Embedded Audio group, SYSTEM->AUDIO GROUP.
6) SDI OUT SEL
- Application : For all available inputs
- Value Range : “CH1” , “CH2” , “CH3” , “CH4”
- Default Value : “CH1”
- Function : Selects the input source to use with SDI Output.
If the selected input channel is in HD-SDI, the output is in HD-SDI, and if the selected input channel
is in SD-SDI input channel, the output is in SD-SDI. But for the analog input channel, it is A/D
converted for SD-SDI output.
7) OSD DISPLAY
- Application : For all available inputs.
- Value Range : “CONTINUE” , “ON 30SEC” , “ON 60SEC”
- Default Value : “CONTINUE”
- Function : Selects the OSD display time period.
If “CONTINUE” is selected, Menu OSD will stay the on screen until user exits out by pressing the
Menu button. For “ON 30SEC” and “ON 60SEC”, Menu OSD will disappear after the selected time
period.
8) KEY DISPLAY
- Application : For all available inputs.
- Value Range : “OFF” , “ON”
- Default Value : “OFF”
- Function : Displays the button ID info in the bottom of the screen. See Chart 6.
The last used button will be displayed in red and the rest will be displayed in white.
DP MODE CH SEL BRIGHT CONTRST CHROMA PEAKING