Tview D65TSG - Manual (Page 60)

60
Button Description
If the Cursor is at or near the selected start point, this button
replaces the previous one, and deletes the start point from the
route. The current GPS position is used again as the start point,
and Automatic Off-route Recalculation is re-enabled.
The Cursor is saved as a user POI. Select the POI group and give
a name for the POI, then select a suitable icon, enter a phone
number, and additional information if you like.
Map locations can be marked with Pins. Unlike POIs, a Pin has no
name and other details, only a colour to let you tell one from
another on the map.
If the Cursor is at or near a Pin, this button replaces the previous
one, and deletes the Pin the Cursor is near to.
The Cursor is saved as the location of a Road Safety Camera
(speed camera or red light camera). A new screen appears where
you can set the type of the camera, the direction of the measured
traffic, and the speed limit checked (if applicable).
If the Cursor is at or near a Road Safety Camera, this button
replaces the previous one, and opens a new screen where you
can edit the details of the camera.
The location of the Cursor is added to the list of frequently visited
destinations, the so called Favourites. You can give a name for the
Favourite.
4.1.5 Position menu
When you follow the recommended route on the map (the Cursor is the current GPS
position), the Position menu replaces the Cursor menu. It does not contain buttons that
modify the current route, as the GPS position is not useful as a route point.
To open the Position menu, tap .
4.1.6 Route Information screen
The Route Information screen has all the data and some of the functions you need while you
navigate. There are two ways to open this screen:
• It can be opened directly from the Map screen by tapping the Turn Preview field ( ).
• In Advanced mode, from the Navigation menu tap the following buttons: ,
.