Tview D65TSG - Manual (Page 23)

23
• If you choose pedestrian: The icon is at your exact GPS position. The direction
of the icon shows your actual heading.
• If you choose any of the vehicles: The icon is aligned to the nearest road to
suppress GPS position errors. The direction of the icon is one of the directions of the
route.
To use the current GPS position, tap . The Position menu appears and you can save
the GPS position as one of the following:
• a Favourite
• a Road Safety Camera
• a POI
• a map marker Pin
2.5.2.2 Returning to normal navigation
When GPS position is available, and you have moved the map (the icon is moving or is
not even visible), or you have rotated the map in 3D mode, the button appears. Tap it
to move the map back to the GPS position and re-enable Track-up map orientation (automatic
map rotation).
Note!
Even if you move the map while you are driving, Nav N Go iGO 8 continues
navigating if there is an active route: it plays the voice instructions and displays
the turn preview icons according to your current GPS position.
2.5.2.3 Selected location (Cursor)
If you select a location in the Find menu, or you tap the map when the map control buttons
are visible, the Cursor appears at the selected point on the map. Nav N Go iGO 8 displays the
Cursor with a radiating red dot ( ) to make it visible at all zoom levels, even when it is in
the background of a 3D map view.
When the Cursor is set, tap . The Cursor menu appears and you can use the Cursor as
one of the following:
• the start point of a route
• a via point in a route
• the destination of a route
You can also search for POIs around the Cursor.
Or you can save the location of the Cursor as:
• a Favourite
• a Road Safety Camera
• a POI