Top Global MB9000 - Manual (Page 63)

Top Global USA. ----MB9000 User Guide
• If MB9000 is configured correctly, check your Internet connection (WWAN card) to see if
it is working correctly.
• Manually configure the TCP/IP settings with a DNS address provided by your ISP.
• Make sure that your browser is set to connect directly and that any dial-up is disabled.
For Internet Explorer, click Tools, Internet Options, and then the Connection tab. Make
sure that Internet Explorer is set to Never dial a connection. For Netscape Navigator, click
Edit, Preferences, Advanced, and Proxy. Make sure that Netscape Navigator is set to
direct connection to the Internet.
Frequently Asked Questions
What is the maximum number of IP addresses that MB9000 will support?
MB9000 will support up to 253 IP addresses.
Is IPSec Pass-Through supported by MB9000?
Yes, it is a built-in feature that MB9000 automatically enables.
Does MB9000 support IPX or AppleTalk?
No. TCP/IP is the only protocol supported.
What is Network Address Translation and what is it used for?
Network Address Translation (NAT) translates multiple IP addresses on the private LAN
to one public address that is sent out to the Internet. This adds a level of security since the
address of a PC connected to the private LAN is never transmitted on the Internet.
Furthermore, NAT allows MB9000 to be used with low cost Internet accounts. The user
may have many private addresses behind this single address provided by the ISP.
Does MB9000 support any operating system other than Windows 98, Windows
Millennium, Windows 2000, or Windows XP?
Yes.
- 63 -