Top Global MB9000 - Manual (Page 29)

Top Global USA. ----MB9000 User Guide
other than the “Auto” mode, the MB9000 will not automatically dial up to the
Internet after powered up, until there is data traffic outward to the Internet
from its LAN users.
Figure 3-21 Dial-On-Demand
MB9000 can be configured to automatically disconnect from Internet
connection after a specified period of inactivity (Max Idle Time). If the Internet
connection has been terminated due to inactivity, Dial-on-Demand enables
MB9000 to automatically re-establish the Internet connection as soon as you
attempt to access the Internet again. Enter a number in seconds you want
your Internet connection to last when there is no data transmission.
„ Manual: If you choose the Manual mode, the MB9000 will not make the Internet
connection when you power up the MB9000.You must manually make the
Cellular connection through web configuration page. To dialup manually, please
login to the MB9000’s WEB configuration page, and go to “Networks”->“WAN”
page or go to “Devices”->“Status” page.
z Keep Alive: This can detect whether the WWAN connection is in good status. When
the WWAN connection is abnormal, it will be detected and the router will try to
reconnect automatically. When the system is still abnormal, modem will be restart.
After consecutively restart for several (configurable) times, if the system still could not
turn well, the router will reboot automatically.
z Status: The Status field shows whether the wireless WAN module has dialed up to
the Internet.
z User Name: Provide a username assigned to the subscriber by the cellular mobile
operator. Please consult your mobile operator for that.
- 29 -