Top Global MB9000 - Manual (Page 58)

Top Global USA. ----MB9000 User Guide
4 Troubleshooting
4.1 Overview
„ Introduction
„ Reset to Factory Default procedure
„ Firmware Upgrade Procedure through Web
„ Common Problems and solutions
„ Frequently Asked Questions
„ LED Indication status
4.2 Introduction
This section helps you to locate problems related to MB9000 setup. The most common
installation problems are related to the IP address.
IP address management is critical and we suggest you to create a chart to document and
validate the IP addresses of your system.
If the password is lost or forgotten, you will need to reset the MB9000 to default values.
The Reset to Factory Default procedure resets the MB9000 configuration settings, but
does not change the current firmware.
Reset to Factory Default Procedure
Use this procedure to reset the network configuration, including the MB9000 IP Address,
Subnet Mask, and so on. The current MB9000 Software will not be erased. This
procedure may be required if the password is forgotten or the configurations are forgotten.
When MB9000 is working in normal status, press and holds the RELOAD button for about
- 58 -