Top Global MB9000 - Manual (Page 28)

Top Global USA. ----MB9000 User Guide
There are three sections on the same page for the wireless Internet configuration: the
basic WWAN option, the PPP dialing parameters and the wireless Internet network mode.
‹ Function Summary
This WAN interface of MB9000 is used to connect Internet and wireless WAN. This
configuration page is used to set some basic parameters of the wireless WAN card.
‹ Detailed Configurations
If Enable this Interface is not checked, no other parameters in this page are available.
z Connect mode: Indicate which wireless WAN connection policy is used.
„ Auto: This option enables MB9000 to automatically make the Internet
connection each time when it powers on. It keeps MB9000 always connected
to the Internet, even when the connection is idle. Once the auto mode been
selected, the keepalive will enabled and MB9000 will check the Internet
connectivity periodically. If MB9000 detects the Internet connection lost on this
interface, it will try to dial up automatically to re-establish the connection. The
default Redial Period is 15 seconds (In other words, the Device will check the
Internet connectivity every 15 seconds).
„ Dial-on-Demand: When Connect mode is set to Dial-On-Demand, MB9000
will disable Keepalive automatically. When Dial-on-Demand mode is selected,
- 28 -