Thor V3 Decoder - ASI, IP, RF - Closed Captions - Manual (Page 8)

2.2.1 Device's Installation Flow Chart Illustrated as following
Inventory
Check
Mounting
In Rack
2.2.2 Environment Requirement
Item
Machine Hall
Space
When user installs machine frame array in
hall, the distance between 2 rows of machine frames
should be 1.2~1.5m and the distance against wall should
be no less than 0.8m.
Machine Hall
Floor
Electric Isolation, Dust Free
Volume resistivity of ground anti
material:1X10
resistance: 1M (Floor bearing should be greater than
450Kg/
Environment
Temperature
5~40 ℃
installing air
Relative
Humidity
20%~80% sustainable 10%~90% short time
Pressure 86~105KPa
Door & Window
Installing rubber strip for sealing door
glasses for window
Wall It can be covered with wallpaper, or brightness less paint.
Fire Protection Fire alarm system and extinguisher
Power
Requiring
lighting power are independent to each other. Device
power requires AC power 100
carefully check before running.
H-HD-IRD
6
s Installation Flow Chart Illustrated as following
：
Connecting
Grouding
Wire and
Power
Cord
Setting
Parameter
Connecting
Signal Wire
2.2.2 Environment Requirements
Requirement
When user installs machine frame array in one machine
hall, the distance between 2 rows of machine frames
should be 1.2~1.5m and the distance against wall should
be no less than 0.8m.
Electric Isolation, Dust Free
Volume resistivity of ground anti-
material:1X10 7 ~1X10 10 Ω
， Grounding current limiting
resistance: 1M (Floor bearing should be greater than
450Kg/ ㎡ )
℃ (sustainable ) ， 0~45 ℃ (short time) ，
installing air-conditioning is recommended
20%~80% sustainable 10%~90% short time
86~105KPa
Installing rubber strip for sealing door-gaps and dual level
glasses for window
It can be covered with wallpaper, or brightness less paint.
Fire alarm system and extinguisher
Requiring device power, air-conditioning power and
lighting power are independent to each other. Device
power requires AC power 100-240V 50-60Hz 2A. Please
carefully check before running.
IRD-V3 User Manual
Running
Device
one machine
hall, the distance between 2 rows of machine frames
should be 1.2~1.5m and the distance against wall should
-static
Grounding current limiting
resistance: 1M (Floor bearing should be greater than
gaps and dual level
It can be covered with wallpaper, or brightness less paint.
conditioning power and
lighting power are independent to each other. Device
. Please