Thor V3 Decoder - ASI, IP, RF - Closed Captions - Manual (Page 10)

User can insert one end into power supply socket, while insert the other end to AC power.
Connecting Grounding Wire
When the device solely connects to protective ground, it should adopt
independent way. Especially if you
device adopts both currents in a united way, the grounding resistance should be smaller
than 1 Ω .
Caution:
Before connecting power cord to
2.4 Signal Cable Connection
The signal connections include the connection of input signal cable and the connection of
output signal cable. The details are as follows:
2.4.1HD-IRD-V3HD IRD Cables Illustration:
IP Input Cable Illustration:
HDMI Cable Illustration
H-HD-IRD
8
User can insert one end into power supply socket, while insert the other end to AC power.
When the device solely connects to protective ground, it should adopt this power in an
pendent way. Especially if you share the same ground with other devices.
united way, the grounding resistance should be smaller
Before connecting power cord to HD IRD, user should set the power switch to “OFF”
2.4 Signal Cable Connection
The signal connections include the connection of input signal cable and the connection of
output signal cable. The details are as follows:
Cables Illustration:
llustration:
IRD-V3 User Manual
User can insert one end into power supply socket, while insert the other end to AC power.
this power in an
d with other devices. When the
united way, the grounding resistance should be smaller
power switch to “OFF”.
The signal connections include the connection of input signal cable and the connection of