Thor V3 Decoder - ASI, IP, RF - Closed Captions - Manual (Page 17)

By pressing the “Enter” key to enter the submenu of 1.1.1
At the submenu 1.1.1, the LCD displays the
multiplexed.
User can also check and set the satellite frequency, LNB frequency and symbol rate of its
corresponding submenu “1.1.2”, “1.1.3
At the submenu 1.1.5, user can decide
At the submenu 1.1.6, user can choose to turn on the 22 KHz to search the programs from
KU band.
1.1.1 Prog: 00 Mux: 00
H-HD-IRD
15
key to enter the submenu of 1.1.1
LCD displays the program number and the count of programs
check and set the satellite frequency, LNB frequency and symbol rate of its
1.1.3”, “1.1.4”.
At the submenu 1.1.5, user can decide which LNB voltage to apply.
choose to turn on the 22 KHz to search the programs from
1.1.1 Prog Parse
1.1.2 Sat Freq Set
1.1.3 LNB Freq Set
1.1.4 Symbol Rate
1.1.5 LNB Voltage
1.1.6 22KHz Switch
1.1.1 Prog: 00 Mux: 00
1.1.2 Sat Freq Set
3840MHZ
1.1.3 LNB Freq Set
5150MHz
1.1.4 Symbol Rate
27500KHz
1.1.5 LNB Voltage
Vertical (13V)
Horizontal (18V)
OFF
1.1.6 22 KHz Switch
► OFF ON
IRD-V3 User Manual
the count of programs
check and set the satellite frequency, LNB frequency and symbol rate of its
choose to turn on the 22 KHz to search the programs from