Thor 1-4 HDMI to ATSC Modulators 8VSB - Manual (Page 25)

H-4HDMI-ATSC-IP
Figure-5
The letters A to D represent the 4 carrier outputs. E represents the
ASI output. Configure different program groups for each carrier output.
If this item is selected, all the input programs will pass through without
any elimination.
Selecting this item to allow user select programs as required to output.
Click “Refresh Input” to refresh the input program list.
Click “Refresh Output” to refresh the output program list.
When user checks one input program with “√”, one can transfer the
checked program to the right box to output.
Select the programs which we want to output or we can output all the programs.
Similarly, cancel the multiplexed programs from the right box.
& to select all the input/output programs with one-time
clicking.
Time limitation to parse the input programs
Click this button to trigger a dialog box as shown below, where to add the
PIDs which need pass through.
In some occasions, there are some PIDs which won’t belong to any program, such as EPG,
NIT tables and so on which user just wants to pass them through the multiplexing module
without changing anything. This is the main purpose of this function.