Thor 1-4 HDMI to ATSC Modulators 8VSB - Manual (Page 18)

H-4HDMI-ATSC-IP
NOTE: The setting for “3.2”, “3.3”, and “3.4” are the same as “3.1” explained/shown above.
ASI Output:
The Thor 4-HDMI-ATSC-IP encoder & modulator has a quad-carrier output: Output A, B,
C, and D.
Output A: the ASI output programs are same as carrier output A.
Output B: the ASI output programs are same as carrier output B.
Output C: the ASI output programs are same as carrier output C.
Output D: the ASI output programs are same as carrier output D.
5) IP Output Setting
The Thor Encoder also has 4 MPTS IP output (Output A, B, C, and D), “4.1” to “4.4” are
for the settings of the 4 MPTS IP outputs respectively. Submenus go as 4.1.1-4.1.6
Enter 4.1.1 to decide whether to turn the IP port on or off, and enter to the rest menu
items to set the corresponding parameters.
4.1.1 IP Output
4.1.2 Service IP
4.1.3 Output IP
4.1.4 Subnet Mask
4.1.5 Gateway
4.1.6 Port
ASI Output
A B C D
4.1 IP Output A
4.2 IP Output B
RF On
Off On
4.3 IP Output C
4.4 IP Output D
IP Output
OFF ON
Service IP
192.168.002.137