Televes Serie H-60 - Manual (Page 98)

98
TV Mode
The following is an example of the parameter selection window:
- DVB-T Parameters -
Pressing opens the window corresponding to the selected parameter.
Selection can be manual or automatic. When you select an automatic option, the equipment
will automatically detect the offset. This may involve a certain delay due to the sweeping of all
possible frequency displacements.
The parameter window will show at the bottom the information on the constellation used for
each carrier and the code rate as well as the cell identifier (Cell Id.).
In the Offset section, if the frequency of the COFDM channel has shifted, an offset may
be applied (0, 1/6, 2/6, 3/6, -1/6, -2/6, -3/6, Auto) to correct the shift. This will only be
valid in the channel mode, and is shown under the current DVB-T channel selection.
Possible
parameters to be
selected with the
rotating selector.
Information on
modulation type
Current
parameter
values.
When the AUTO option is selected in any of the parameters, the equipment
automatically selects the suitable option even though hookup time will increase.
01031052_002_EN:103130_00.qxd 10/07/2013 8:00 Página 98