Televes Serie H-60 User Manual
Page 42
42
Measures Config.
- Units
The equipment offers the possibility of using several types of units:
dBµV
,
dBmV
and
dBm.
The meter is configured by default to measure in dBµV.
dBµV
: This is used for devices with reduced output voltage, under 130 dBµV, such
as aerial devices.
dBmV
: This is used for devices with reduced output voltage, and particularly to
provide receiver input sensitivity data and in CATV equipment.
dBm
: This is used in high-power devices such as transmitters and re-transmitters.
3.3.1.5.- Quality Profiles
Using this menu we can choose between the different profiles that establish the limits for the
quality indicators. This means that users can choose a different profile depending on their
requirements.
The device has 2 pre-installed profiles: socket and headend.
Users may configure up to four profiles using the HSuite application.
- Quality Profiles -
When recovering to the configuration by defect, all the changes realised in the profiles
will be lost, returning to the profiles by defect of the measurer.
01031052_002_EN:103130_00.qxd 10/07/2013 8:00 Página 42