Televes Serie H-60 - Manual (Page 80)

80
Equipment Config.
- Battery change information window -
3.- Turn off the equipment.
4.- Disconnect the equipment from the power grid.
Precautions to be taken when replacing battery:
• Both when removing the battery from the equipment and when
reconnecting it, make sure that the meter is turned off.
• If the battery is removed from the equipment, when it is replaced,
make sure that it is properly reconnected.
• If metal tools are used for battery installation, the battery must be
insulated, because a short circuit might occur.
• Do not connect the positive and negative poles of a battery with
any metal item, since it could heat up, emit hydrogen gas,
overflow, burn or explode.
• Only batteries supplied by Televés and adapted to your
equipment may be used.
This function must be used only and exclusively when a battery
replacement has been made, since it affects a series of
parameters that are necessary for controlling battery charging and
discharging and if these vary, there will be a negative effect on the
autonomy and lifespan of the battery.
01031052_002_EN:103130_00.qxd 10/07/2013 8:00 Página 80