Televes Serie H-60 User Manual

Page 84

TV Mode

Parameter description is as follows:

To stop viewing the line, this option must be pressed again, or you must enter a mode that is
different from terrestrial Analog.

Line
Number

This is where we show the line we wish to view. This value must be
between 1 and 625 for standard PAL and between 1 and 525 for
standard NTSC.

To change this value, we can use the

or press key to introduce

the value directly and

to validate.

Zoom

In this option we choose the zoom we wish to apply on the line, choosing
from among 1x, 2x, 4x and 8x.

To change the option we can use the

Offset

This option may be used to browse the line in the event we have a zoom
value that is different from 1x.

To change the option we can use the

Channel

This indicates the channel we are viewing.

If we press the key

the channel name will be shown, and if we

press

the channel frequency will be shown. To change channels, we

can press

or , according to whether we are viewing the channel

name or frequency, and insert the new channel, confirming this with

We can also use the

to change the value.

01031052_002_EN:103130_00.qxd 10/07/2013 8:00 Página 84