Televes Serie H-60 - Manual (Page 125)

125
EN
It is possible to change the channels between which is measured the TILT parameter. To do this, we
must select with and the desired channel and press the button , a submenu
will appear that will allow us to choose if it is the mark where starts TILT (mark A) or if it is the mark
where finish TILT (mark B). The last option (Channel) is a shortcut to change theselected channel
frequency.
- TILT marks -
You can configure various aspects of the graphic representation of the attenuation:
- REF LEVEL: Allows to choose the reference level in dB, +60 to +120 dB.
The AUTO option allows the reference level be set automatically, according to the measured
attenuation values. It is also possible to vary this parameter with the / .
- DB/DIV: It is possible to configure the number of dB per division (10, 5 and 2 dB/Div).
01031052_002_EN:103130_00.qxd 10/07/2013 8:01 Página 125