Pinnacle Systems MG - Manual (Page 32)

Figure 14: Swing-Arm Mounting Bracket Dimensions
Pedestal
The heavy duty, all-welded steel pedestal floor mounts
can be used for mounting either the MicroGuard Metal
Box or DIN-rail Controller Module light curtain or
cornering mirrors. Sliding mounts on the pedestal are
universal in design and are supplied standard. Unique
floating base on pedestal is designed to compensate
for uneven floors. Pedestal is fabricated from 12 gauge
steel, the base is ¼” steel plate, and the entire unit is
painted OSHA yellow.
Standard height = 72” (model 8000)
Optional height = 96” (model 8096)
NOTE: Do not mount pedestal to floor until you have
fully installed your guarding system and know it is
operating properly in its current position on the floor.
WARNING: Pedestals must be bolted to the floor
after installation; they must not be movable.
11-183 Standard Single mounting bracket
(shown)
11-184 Special Dual pedestal mounting
bracket. Has two mounting studs 90
deg apart. Allows both Emitter and
Receiver pylon on one pedestal.
Requires SMB option on pylons.
Figure 13: Pedestal Dimensions
Accessories
Metal Box Controller Module
22
Stud is 3/8”-16 x 10/16” long
Model 9000 and 9500
Excellent method of mounting the light guard for press brakes or when the light guard is to be moved for die setups
or machine maintenance. Model 9000 consists of three 180-pivot points along with light guard diagonal movement
capability for virtually unlimited light guard positioning. Two-inch square tubing 3/16” thick painted OSHA yellow
which mounts directly onto the machine housing and makes for a heavy duty yet versatile mounting bracket. Model
9500 consists of two 180-pivot points and one adjustable length arm.
Model 9000 Swing Arm Brackets Model 9500 Swing Arm Brackets