Pengo RevTrak - Manual (Page 8)

8 PENGO RevTrak Manual
COMPONENT IDENTIFICATION
Pengo continually looks for new ways to improve its products. Therefore, Pengo reserves the right to make changes to our
products and specifications without notice.
Use the illustration below to help familiarize yourself with the various components and controls.
ITEM PART No. QTY DESCRIPTION
6024 DISPLAY RM-1401 S02 [REVTRAK]
2 6025 LOGGER CAN [REVTRAK]
3 6026 CONTROLLER DVC7 [REVTRAK]
4 6027 HARNESS WIRE-DRIVE [REVTRAK]
5 6028 HARNESS WIRE-DISPLAY [REVTRAK]
6 6029 3 TRANSDUCER 5000 PSI [REVTRAK]
7 60220 CABLE 10’ SECTION [REVTRAK]
8 6022 CABLE 20’ SECTION [REVTRAK]
9 60222 CLIP BRACKET LOGGER [REVTRAK]
0 60300 CARD MEMORY 2GB REVTRAK
60232 BRACKET DISPLAY MNT PAINTED
2 60294 CARD READER USB REVTRAK
3 60297 2 CUP SUCTION .50 OD RUBBER
4* 60295 6 SCREW HEX SOC HD M4x0 ZINC
5* 60296 2 NUT HEX M4
6 6030 CABLE SECONDARY POWER
7* 5662 2 SCREW HEX HD /4” X -/2”
8* 7452 2 NUT HEX LOCK 1/4”
9* 260046 2 NUT HEX 0-24
LBS Kg
1.13 0.51
610232
CHECKED BY DATE MJR
A
THIRD ANGLE PROJECTION
TOLERANCES UNLESS OTHERWISE SPECIFIED
.X .1 [2.54 .XX .03 [.76] .XXX .010 [.25] ANGLE 1 DEG.
HEAT TREAT SHEET 1 OF 1
BRACKET, DISPLAY MOUNT (PAINTED)
EAM
SCALE: 1:2
REV SIZE
TITLE:
ASSEMBLY MATERIAL DRAWN BY
THIS DRAWING IS THE PROPERTY OF PENGO 500 E.
HIGHWAY 10 LAURENS, IA. 50554. NO USE THEREOF SHALL
BE MADE OTHER THAN AS A REFERENCE FOR PROPOSALS
SUBMITTED BY PENGO CORPORATION AND/OR FOR JOBS
BEING EXECUTED IN CONFORMITY WITH SUCH PROPOSALS
HAVE BEEN ACCEPTED. UNLESS THE CONSENT OF SAID
PENGO CORPORATION HAS BEEN PREVIOUSLY OBTAINED.
NO PART OF THIS DRAWING SHALL BE COPPIED OR
DUPLICATED OR IT'S CONTENTS DISCLOSED.
NONE
08/20/09
11 LBS Kg 0.00
THIS DRAWING IS THE PROPERTY OF PENGO 500 E. HIGHWAY 10 LAURENS, IA. 50554. NO USE THEREOF SHALL BE MADE OTHER THAN AS A REFERENCE FOR PROPOSALS SUBMITTED BY PENGO CORPORATION AND/OR FOR JOBS BEING EXECUTED IN CONFORMITY WITH SUCH PROPOSALS HAVE BEEN ACCEPTED. UNLESS THE CONSENT OF SAID PENGO CORPORATION HAS BEEN PREVIOUSLY OBTAINED. NO PART OF THIS DRAWING SHALL BE COPPIED OR DUPLICATED OR IT'S CONTENTS DISCLOSED.
DRAWN BY MATERIAL
TITLE:
SIZE REV
SCALE: 1:1
EAM
SHEET 1 OF 1 HEAT TREAT
TOLERANCES UNLESS OTHERWISE SPECIFIED .X .1 [2.54 .XX .03 [.76] .XXX .010 [.25] ANGLE 1 DEG.
THIRD ANGLE PROJECTION
A
DATE CHECKED BY
610294
12
LBS Kg 0.00
THIS DRAWING IS THE PROPERTY OF PENGO 500 E.
HIGHWAY 10 LAURENS, IA. 50554. NO USE THEREOF SHALL BE MADE OTHER THAN AS A REFERENCE FOR PROPOSALS
SUBMITTED BY PENGO CORPORATION AND/OR FOR JOBS BEING EXECUTED IN CONFORMITY WITH SUCH PROPOSALS
HAVE BEEN ACCEPTED. UNLESS THE CONSENT OF SAID PENGO CORPORATION HAS BEEN PREVIOUSLY OBTAINED.
NO PART OF THIS DRAWING SHALL BE COPPIED OR DUPLICATED OR IT'S CONTENTS DISCLOSED.
DRAWN BY MATERIAL
TITLE:
SIZE REV
SCALE: 1:1
EAM
SHEET 1 OF 1 HEAT TREAT
TOLERANCES UNLESS OTHERWISE SPECIFIED .X .1 [2.54 .XX .03 [.76] .XXX .010 [.25] ANGLE 1 DEG.
THIRD ANGLE PROJECTION
A
DATE CHECKED BY
610297
LBS Kg 0.00
THIS DRAWING IS THE PROPERTY OF PENGO 500 E.
HIGHWAY 10 LAURENS, IA. 50554. NO USE THEREOF SHALL BE MADE OTHER THAN AS A REFERENCE FOR PROPOSALS
SUBMITTED BY PENGO CORPORATION AND/OR FOR JOBS BEING EXECUTED IN CONFORMITY WITH SUCH PROPOSALS
HAVE BEEN ACCEPTED. UNLESS THE CONSENT OF SAID
PENGO CORPORATION HAS BEEN PREVIOUSLY OBTAINED. NO PART OF THIS DRAWING SHALL BE COPPIED OR
DUPLICATED OR IT'S CONTENTS DISCLOSED.
DRAWN BY MATERIAL
TITLE:
SIZE REV
SCALE: 1:1
EAM
SHEET 1 OF 1 HEAT TREAT
TOLERANCES UNLESS OTHERWISE SPECIFIED .X .1 [2.54 .XX .03 [.76] .XXX .010 [.25] ANGLE 1 DEG.
THIRD ANGLE PROJECTION
A
DATE CHECKED BY
610297
13
LBS Kg 0.00 610310
THIS DRAWING IS THE PROPERTY OF PENGO 500 E. HIGHWAY 10 LAURENS, IA. 50554. NO USE THEREOF SHALL BE MADE OTHER THAN AS A REFERENCE FOR PROPOSALS SUBMITTED BY PENGO CORPORATION AND/OR FOR JOBS BEING EXECUTED IN CONFORMITY WITH SUCH PROPOSALS HAVE BEEN ACCEPTED. UNLESS THE CONSENT OF SAID PENGO CORPORATION HAS BEEN PREVIOUSLY OBTAINED. NO PART OF THIS DRAWING SHALL BE COPIED OR DUPLICATED OR IT'S CONTENTS DISCLOSED.
DRAWN BY MATERIAL
TITLE:
SIZE REV SCALE: 1:2 SHEET 1 OF 1 HEAT TREAT TOLERANCES UNLESS OTHERWISE SPECIFIED .X .1 [2.54 .XX .03 [.76] .XXX .010 [.25] ANGLE 1 DEG.
THIRD ANGLE PROJECTION
C
DATE CHECKED BY
C
610310
REV
16
LBS Kg 0.00
THIS DRAWING IS THE PROPERTY OF PENGO 500 E. HIGHWAY 10 LAURENS, IA. 50554. NO USE THEREOF SHALL BE MADE OTHER THAN AS A REFERENCE FOR PROPOSALS SUBMITTED BY PENGO CORPORATION AND/OR FOR JOBS BEING EXECUTED IN CONFORMITY WITH SUCH PROPOSALS HAVE BEEN ACCEPTED. UNLESS THE CONSENT OF SAID PENGO CORPORATION HAS BEEN PREVIOUSLY OBTAINED. NO PART OF THIS DRAWING SHALL BE COPPIED OR DUPLICATED OR IT'S CONTENTS DISCLOSED.
DRAWN BY MATERIAL TITLE:
SIZE REV SCALE: 2:1
EAM
SHEET 1 OF 1 HEAT TREAT TOLERANCES UNLESS OTHERWISE SPECIFIED .X .1 [2.54 .XX .03 [.76] .XXX .010 [.25] ANGLE 1 DEG.
THIRD ANGLE PROJECTION
A
DATE CHECKED BY
610300
10
LBS Kg 0.05 0.02 08/18/09 NONE
THIS DRAWING IS THE PROPERTY OF PENGO 500 E. HIGHWAY 10 LAURENS, IA. 50554. NO USE THEREOF SHALL BE MADE OTHER THAN AS A REFERENCE FOR PROPOSALS SUBMITTED BY PENGO CORPORATION AND/OR FOR JOBS BEING EXECUTED IN CONFORMITY WITH SUCH PROPOSALS HAVE BEEN ACCEPTED. UNLESS THE CONSENT OF SAID PENGO CORPORATION HAS BEEN PREVIOUSLY OBTAINED. NO PART OF THIS DRAWING SHALL BE COPPIED OR DUPLICATED OR IT'S CONTENTS DISCLOSED.
DRAWN BY MATERIAL STEEL TITLE:
SIZE REV SCALE: 1:2
EAM
CLIP BARCKET, LOGGER [TORQUE TRAK]
SHEET 1 OF 1 HEAT TREAT TOLERANCES UNLESS OTHERWISE SPECIFIED .X .1 [2.54 .XX .03 [.76] .XXX .010 [.25] ANGLE 1 DEG.
THIRD ANGLE PROJECTION
A
MJR DATE CHECKED BY
610222
9
LBS Kg 0.00
REV
610220
D
610220
THIS DRAWING IS THE PROPERTY OF PENGO 500 E. HIGHWAY 10 LAURENS, IA. 50554. NO USE THEREOF SHALL BE MADE OTHER THAN AS A REFERENCE FOR PROPOSALS SUBMITTED BY PENGO CORPORATION AND/OR FOR JOBS BEING EXECUTED IN CONFORMITY WITH SUCH PROPOSALS HAVE BEEN ACCEPTED. UNLESS THE CONSENT OF SAID PENGO CORPORATION HAS BEEN PREVIOUSLY OBTAINED. NO PART OF THIS DRAWING SHALL BE COPPIED OR DUPLICATED OR IT'S CONTENTS DISCLOSED.
DRAWN BY MATERIAL
TITLE:
SIZE REV SCALE: 1:1
-
SHEET 1 OF 1 HEAT TREAT TOLERANCES UNLESS OTHERWISE SPECIFIED .X .1 [2.54 .XX .03 [.76] .XXX .010 [.25] ANGLE 1 DEG.
THIRD ANGLE PROJECTION
D
DATE CHECKED BY
8
LBS Kg 0.00
REV
610220
D
610220
THIS DRAWING IS THE PROPERTY OF PENGO 500 E. HIGHWAY 10 LAURENS, IA. 50554. NO USE THEREOF SHALL BE MADE OTHER THAN AS A REFERENCE FOR PROPOSALS SUBMITTED BY PENGO CORPORATION AND/OR FOR JOBS BEING EXECUTED IN CONFORMITY WITH SUCH PROPOSALS HAVE BEEN ACCEPTED. UNLESS THE CONSENT OF SAID PENGO CORPORATION HAS BEEN PREVIOUSLY OBTAINED. NO PART OF THIS DRAWING SHALL BE COPPIED OR DUPLICATED OR IT'S CONTENTS DISCLOSED.
DRAWN BY MATERIAL
TITLE:
SIZE REV SCALE: 1:1
-
SHEET 1 OF 1 HEAT TREAT TOLERANCES UNLESS OTHERWISE SPECIFIED .X .1 [2.54 .XX .03 [.76] .XXX .010 [.25] ANGLE 1 DEG.
THIRD ANGLE PROJECTION
D
DATE CHECKED BY
7
LBS Kg 0.27 0.12 09/09/09 NONE
THIS DRAWING IS THE PROPERTY OF PENGO 500 E. HIGHWAY 10 LAURENS, IA. 50554. NO USE THEREOF SHALL BE MADE OTHER THAN AS A REFERENCE FOR PROPOSALS SUBMITTED BY PENGO CORPORATION AND/OR FOR JOBS BEING EXECUTED IN CONFORMITY WITH SUCH PROPOSALS HAVE BEEN ACCEPTED. UNLESS THE CONSENT OF SAID PENGO CORPORATION HAS BEEN PREVIOUSLY OBTAINED. NO PART OF THIS DRAWING SHALL BE COPPIED OR DUPLICATED OR IT'S CONTENTS DISCLOSED.
DRAWN BY MATERIAL STAINLESS STEEL TITLE:
SIZE REV SCALE: 1:1
EAM
TRANSDUCER, 5000 PSI [TORQUE TRAK]
SHEET 1 OF 1 HEAT TREAT TOLERANCES UNLESS OTHERWISE SPECIFIED .X .1 [2.54 .XX .03 [.76] .XXX .010 [.25] ANGLE 1 DEG.
THIRD ANGLE PROJECTION
A
MJR DATE CHECKED BY
610219 LBS Kg 0.27 0.12 09/09/09 NONE
THIS DRAWING IS THE PROPERTY OF PENGO 500 E. HIGHWAY 10 LAURENS, IA. 50554. NO USE THEREOF SHALL BE MADE OTHER THAN AS A REFERENCE FOR PROPOSALS SUBMITTED BY PENGO CORPORATION AND/OR FOR JOBS BEING EXECUTED IN CONFORMITY WITH SUCH PROPOSALS HAVE BEEN ACCEPTED. UNLESS THE CONSENT OF SAID PENGO CORPORATION HAS BEEN PREVIOUSLY OBTAINED. NO PART OF THIS DRAWING SHALL BE COPPIED OR DUPLICATED OR IT'S CONTENTS DISCLOSED.
DRAWN BY MATERIAL STAINLESS STEEL TITLE:
SIZE REV SCALE: 1:1
EAM
TRANSDUCER, 5000 PSI [TORQUE TRAK]
SHEET 1 OF 1 HEAT TREAT TOLERANCES UNLESS OTHERWISE SPECIFIED .X .1 [2.54 .XX .03 [.76] .XXX .010 [.25] ANGLE 1 DEG.
THIRD ANGLE PROJECTION
A
MJR DATE CHECKED BY
610219 LBS Kg 0.27 0.12 09/09/09 NONE
THIS DRAWING IS THE PROPERTY OF PENGO 500 E. HIGHWAY 10 LAURENS, IA. 50554. NO USE THEREOF SHALL BE MADE OTHER THAN AS A REFERENCE FOR PROPOSALS SUBMITTED BY PENGO CORPORATION AND/OR FOR JOBS BEING EXECUTED IN CONFORMITY WITH SUCH PROPOSALS HAVE BEEN ACCEPTED. UNLESS THE CONSENT OF SAID PENGO CORPORATION HAS BEEN PREVIOUSLY OBTAINED. NO PART OF THIS DRAWING SHALL BE COPPIED OR DUPLICATED OR IT'S CONTENTS DISCLOSED.
DRAWN BY MATERIAL STAINLESS STEEL TITLE:
SIZE REV SCALE: 1:1
EAM
TRANSDUCER, 5000 PSI [TORQUE TRAK]
SHEET 1 OF 1 HEAT TREAT TOLERANCES UNLESS OTHERWISE SPECIFIED .X .1 [2.54 .XX .03 [.76] .XXX .010 [.25] ANGLE 1 DEG.
THIRD ANGLE PROJECTION
A
MJR DATE CHECKED BY
610219
6
LBS Kg 0.00
REV
610218
D
610218
THIS DRAWING IS THE PROPERTY OF PENGO 500 E. HIGHWAY 10 LAURENS, IA. 50554. NO USE THEREOF SHALL BE MADE OTHER THAN AS A REFERENCE FOR PROPOSALS SUBMITTED BY PENGO CORPORATION AND/OR FOR JOBS BEING EXECUTED IN CONFORMITY WITH SUCH PROPOSALS HAVE BEEN ACCEPTED. UNLESS THE CONSENT OF SAID PENGO CORPORATION HAS BEEN PREVIOUSLY OBTAINED. NO PART OF THIS DRAWING SHALL BE COPPIED OR DUPLICATED OR IT'S CONTENTS DISCLOSED.
DRAWN BY MATERIAL
TITLE:
SIZE REV
SCALE: 1:2
-
SHEET 1 OF 1 HEAT TREAT
TOLERANCES UNLESS OTHERWISE SPECIFIED .X .1 [2.54 .XX .03 [.76] .XXX .010 [.25] ANGLE 1 DEG.
THIRD ANGLE PROJECTION
D
DATE CHECKED BY
5
LBS Kg
NA 0.00
08/18/09
NONE
THIS DRAWING IS THE PROPERTY OF PENGO 500 E.
HIGHWAY 10 LAURENS, IA. 50554. NO USE THEREOF SHALL
BE MADE OTHER THAN AS A REFERENCE FOR PROPOSALS
SUBMITTED BY PENGO CORPORATION AND/OR FOR JOBS
BEING EXECUTED IN CONFORMITY WITH SUCH PROPOSALS
HAVE BEEN ACCEPTED. UNLESS THE CONSENT OF SAID
PENGO CORPORATION HAS BEEN PREVIOUSLY OBTAINED.
NO PART OF THIS DRAWING SHALL BE COPPIED OR
DUPLICATED OR IT'S CONTENTS DISCLOSED.
DRAWN BY
MATERIAL NA
TITLE:
SIZE REV
SCALE: 1:2
EAM
LOGGER CAN [TORQUE TRAK]
SHEET 1 OF 1 HEAT TREAT
TOLERANCES UNLESS OTHERWISE SPECIFIED
.X .1 [2.54 .XX .03 [.76] .XXX .010 [.25] ANGLE 1 DEG.
THIRD ANGLE PROJECTION
A
MJR DATE CHECKED BY
610215
2
TOLERANCES UNLESS OTHERWISE SPECIFIED .X .1 [2.54 .XX .03 [.76] .XXX .010 [.25] ANGLE 1 DEG.
LBS Kg NA 0.00
610216
08/18/09
NONE
THIS DRAWING IS THE PROPERTY OF PENGO 500 E. HIGHWAY 10 LAURENS, IA. 50554. NO USE THEREOF SHALL BE MADE OTHER THAN AS A REFERENCE FOR PROPOSALS SUBMITTED BY PENGO CORPORATION AND/OR FOR JOBS BEING EXECUTED IN CONFORMITY WITH SUCH PROPOSALS HAVE BEEN ACCEPTED. UNLESS THE CONSENT OF SAID PENGO CORPORATION HAS BEEN PREVIOUSLY OBTAINED. NO PART OF THIS DRAWING SHALL BE COPPIED OR DUPLICATED OR IT'S CONTENTS DISCLOSED.
DRAWN BY MATERIAL NA
TITLE:
SIZE REV SCALE: 1:2
CONTROLLER, DVC7 [TORQUE TRAK]
SHEET 1 OF 1 HEAT TREAT
THIRD ANGLE PROJECTION
B
MJR DATE CHECKED BY
3
LBS Kg 0.00
REV
610217
D
610217
THIS DRAWING IS THE PROPERTY OF PENGO 500 E. HIGHWAY 10 LAURENS, IA. 50554. NO USE THEREOF SHALL BE MADE OTHER THAN AS A REFERENCE FOR PROPOSALS SUBMITTED BY PENGO CORPORATION AND/OR FOR JOBS BEING EXECUTED IN CONFORMITY WITH SUCH PROPOSALS HAVE BEEN ACCEPTED. UNLESS THE CONSENT OF SAID PENGO CORPORATION HAS BEEN PREVIOUSLY OBTAINED. NO PART OF THIS DRAWING SHALL BE COPPIED OR DUPLICATED OR IT'S CONTENTS DISCLOSED.
DRAWN BY MATERIAL
TITLE:
SIZE REV SCALE: 1:2
-
SHEET 1 OF 1 HEAT TREAT TOLERANCES UNLESS OTHERWISE SPECIFIED .X .1 [2.54 .XX .03 [.76] .XXX .010 [.25] ANGLE 1 DEG.
THIRD ANGLE PROJECTION
D
DATE CHECKED BY
4
TOLERANCES UNLESS OTHERWISE SPECIFIED .X .1 [2.54 .XX .03 [.76] .XXX .010 [.25] ANGLE 1 DEG.
LBS Kg NA 0.00
610214
08/18/09 NONE
THIS DRAWING IS THE PROPERTY OF PENGO 500 E. HIGHWAY 10 LAURENS, IA. 50554. NO USE THEREOF SHALL BE MADE OTHER THAN AS A REFERENCE FOR PROPOSALS SUBMITTED BY PENGO CORPORATION AND/OR FOR JOBS BEING EXECUTED IN CONFORMITY WITH SUCH PROPOSALS HAVE BEEN ACCEPTED. UNLESS THE CONSENT OF SAID PENGO CORPORATION HAS BEEN PREVIOUSLY OBTAINED. NO PART OF THIS DRAWING SHALL BE COPPIED OR DUPLICATED OR IT'S CONTENTS DISCLOSED.
DRAWN BY MATERIAL NA
TITLE:
SIZE REV
SCALE: 1:2
DISPLAY, RM-1401 S02 [TORQUE TRAK]
SHEET 1 OF 1 HEAT TREAT
THIRD ANGLE PROJECTION
B
MJR DATE CHECKED BY
1