Pengo RevTrak - Manual (Page 21)

PENGO RevTrak Manual 2
DATA EXPORT (DOwNLOAD)
. Open the top lid of the Logger to remove the SD card.
Do not open lid by force! See figure 1E.
2. Remove the SD card from the logger by pressing down
on the top of the card to release it from the logger.
3. Remove the end caps from the card reader (2) to
expose the USB connection and the SD card slot. See
figure 2E.
4. Place the SD card into the card reader as shown in
figure 2E.
5. Connect the card reader to a computer or laptop using
the USB port. Once the card reader is connected a red
light on the card reader will be visible.
6. The computer or laptop should recognise the card
reader automatically. If the card reader window does
not appear upon connection, open My Computer and
the card reader will be shown as a new drive letter and
labeled “Removable Disk”. See figure 3E.
REvTRAK OPERATION
OPERATING PROCEDURES CONT.
Figure 2E
LBS Kg
0.00
THIS DRAWING IS THE PROPERTY OF PENGO 500 E.
HIGHWAY 10 LAURENS, IA. 50554. NO USE THEREOF SHALL
BE MADE OTHER THAN AS A REFERENCE FOR PROPOSALS
SUBMITTED BY PENGO CORPORATION AND/OR FOR JOBS
BEING EXECUTED IN CONFORMITY WITH SUCH PROPOSALS
HAVE BEEN ACCEPTED. UNLESS THE CONSENT OF SAID
PENGO CORPORATION HAS BEEN PREVIOUSLY OBTAINED.
NO PART OF THIS DRAWING SHALL BE COPPIED OR
DUPLICATED OR IT'S CONTENTS DISCLOSED.
DRAWN BY
MATERIAL
TITLE:
SIZE REV
SCALE: 1:2
EAM
SHEET 1 OF 1
HEAT TREAT
TOLERANCES UNLESS OTHERWISE SPECIFIED
.X .1 [2.54 .XX .03 [.76] .XXX .010 [.25] ANGLE 1 DEG.
THIRD ANGLE PROJECTION
A
DATE CHECKED BY
610294-300
LBS Kg
0.00
THIS DRAWING IS THE PROPERTY OF PENGO 500 E.
HIGHWAY 10 LAURENS, IA. 50554. NO USE THEREOF SHALL
BE MADE OTHER THAN AS A REFERENCE FOR PROPOSALS
SUBMITTED BY PENGO CORPORATION AND/OR FOR JOBS
BEING EXECUTED IN CONFORMITY WITH SUCH PROPOSALS
HAVE BEEN ACCEPTED. UNLESS THE CONSENT OF SAID
PENGO CORPORATION HAS BEEN PREVIOUSLY OBTAINED.
NO PART OF THIS DRAWING SHALL BE COPPIED OR
DUPLICATED OR IT'S CONTENTS DISCLOSED.
DRAWN BY
MATERIAL
TITLE:
SIZE REV
SCALE: 1:2
EAM
SHEET 1 OF 1
HEAT TREAT
TOLERANCES UNLESS OTHERWISE SPECIFIED
.X .1 [2.54 .XX .03 [.76] .XXX .010 [.25] ANGLE 1 DEG.
THIRD ANGLE PROJECTION
A
DATE CHECKED BY
610294-300
USB Connection
2
0
Insert SD card into card
reader. Note orientation of
the arrow on the SD card.
End Cap
End Cap
Figure 3E
Open Removable Disk to
access RevTrak Data