Pengo RevTrak - Manual (Page 5)

PENGO RevTrak Manual 5
GENERAL PRECAUTIONS - CONTINUED
LOwER OR SUPPORT RAISED EQUIPMENT
During installation of the RevTrak system:
• Do not work under raised booms without supporting them.
• Do not use support material made of concrete blocks, logs, buckets, barrels, or any other material
that could suddenly collapse or shift positions.
• Make sure support material is solid, not decayed, warped, twisted, or tapered.
• Lower booms to ground level or on blocks.
• Lower booms and attachments to the ground before leaving the cab or operator’s station.
• Keep others away when making any adjustments to the unit.
wARNING
SAFETY DECALS
This unit comes equipped with all safety decals in place. They are designed to help you safely
operate your unit. Read and follow all safety decals.
• Keep all safety decals clean and legible at all times.
• Replace safety decals that are missing or have become illegible.
• Safety decals are available from your distributor or manufacture.
• Some parts installed during repair may require safety decals to be affixed to the replacement
part. When ordering the replacement part(s) be sure the correct safety decal(s) are included in
your order.
INSTALLING SAFETY DECALS
• Clean the desired area with warm soapy water.
• Decide on exact position before you remove the backing paper.
• Peel backing paper from decal. Press firmly on the surface.
• Air pockets can be pierced with a pin and smoothed.
SAFETY DECAL INFORMATION
Figure