Pengo RevTrak - Manual (Page 23)

PENGO RevTrak Manual 23
REvTRAK DATA ChARTING
DATA ChARTING (RAw DATA)
Below is an example of the raw data recorded by the RevTrak system and opened with Microsoft Excel. This data has
not been formatted or manipulated. This is the recorded data in its raw format.
Note: All torque values are recorded in FT/LBS
Model_ID DIF PSI Torque Date Time
7 900 726 2.04.0 9:44:34:004
7 36 278 2.04.0 9:44:39:458
7 90 2282 2.04.0 9:44:44:523
7 254 2405 2.04.0 9:44:49:578
7 306 2504 2.04.0 9:44:54:900
7 389 2663 2.04.0 9:45:00:075
7 459 2798 2.04.0 9:45:05:57
7 583 3035 2.04.0 9:45:0:903
7 702 3264 2.04.0 9:45:6:688
7 939 378 2.04.0 9:45:2:887
7 222 4242 2.04.0 9:45:27:54
7 2487 4769 2.04.0 9:45:33:048
7 28 5265 2.04.0 9:45:38:504
7 42 5840 2.04.0 9:45:44:370
7 673 6876 2.04.0 9:45:50:343
7 04 27 2.04.0 9:48:33:240
7 35 252 2.04.0 9:48:38:737
7 547 2966 2.04.0 9:48:43:880
7 795 3442 2.04.0 9:48:49:270
7 877 3599 2.04.0 9:48:55:89
7 2023 3879 2.04.0 9:49:0:27
7 288 496 2.04.0 9:49:06:458
7 2306 4422 2.04.0 9:49::70
7 204 4948 2.04.0 9:49:7:352
7 365 560 2.04.0 9:49:22:949
7 52 625 2.04.0 9:49:28:784
7 689 6942 2.04.0 9:49:34:078
7 8 7443 2.04.0 9:49:39:530
7 2023 834 2.04.0 9:49:44:670
7 9 246 2.04.0 9:52:4:27
7 303 2498 2.04.0 9:52:46:306
7 458 2796 2.04.0 9:52:5:686
7 60 3087 2.04.0 9:52:57:57
7 788 3429 2.04.0 9:53:03:39
7 923 3688 2.04.0 9:53:08:388
7 206 4039 2.04.0 9:53:3:848
7 2257 4328 2.04.0 9:53:8:887
7 240 4604 2.04.0 9:53:24:608
7 97 499 2.04.0 9:53:30:007
7 387 5700 2.04.0 9:53:35:087
7 486 607 2.04.0 9:53:40:547
7 62 6662 2.04.0 9:53:45:886
7 772 7283 2.04.0 9:53:5:293
7 902 787 2.04.0 9:53:56:38
7 208 8664 2.04.0 9:54:02:060
Models recorded by numeric
code. See Model Key.
Differential Pressure
(PSI)
Torque Value
(Ft/Lbs)
Date
(DD.MM.YY)
Time
(HH:MM:SS:MS)
Look for time gaps. Time Gaps
indicate breaks between anchor
installations.
Decrease in pressure while
torque continues to increase
indicates that the Drive
shifted from low torque to high
torque.
(Two Speed Models only)
Time Gap
Model Code
7 = RT-2
Note: It is recommended
that when recording data
the operator start and stop
the recording with each
anchor / pier. Allowing
the RevTrak system to
continuously record for
extended periods of time
will make interpreting the
exported data difficult.