Paxton Superchargers 4.6L SOHC Mustang GT User Manual

Page 8

P/N: 4809655

16AUG07 v1.0 96-03MusGT(4809655v1.0)

1-2

Fig. 1.1-b

Fig. 1.1-c

Fig. 1.1-d

Fig. 1.1-e (1996-1998 Models)

E. Once the assembly is out of the car, use a

10mm socket to remove the mass air flow
sensor from the air filter housing. (See Fig.
1.1-d.) Place the mass air flow sensor aside to
be re-installed in a later step.

1996-1998 Models Only

F. Unplug the coil pack on the passenger’s side

of the engine. (See Fig. 1.1-e.)

C. Remove the air temperature sensor from the

air inlet duct and set it aside. The sensor will
be re-installed in a later step.

D. Use an 8mm socket to remove the single air

filter housing retaining bolt. The air filter and
mass air sensor can then be removed as an
assembly. (See Fig. 1.1-c.)

*** NOTE ***

This manual covers model years 1996-2003. Some

of the photographs and illustrations may be different

but the removal and installation of components are

similar.

*** NOTE ***

2002-2003 models do not have a separate IAT sen-

sor. (The IAT sensor is integrated with the factory

MAF.)

B. Using a flat-head screwdriver or 5/16" nut

driver, loosen the hose clamps at the mass air
flow sensor and the throttle body, and remove
the air inlet hose. (See Fig. 1.1-b.)