Paxton Superchargers 4.6L SOHC Mustang GT User Manual

Page 30

P/N: 4809655

16AUG07 v1.0 96-03MusGT(4809655v1.0)

5-6

E. Disconnect the factory fuel line at the fuel fil-

ter using the supplied tool. Connect the male
fitting from the fuel pump to the line that you
removed from the fuel filter. Connect the
female end from the fuel pump to the fuel fil-
ter.

F. The in-line auxiliary fuel pump is installed

next. Remove the spare tire from the well in
the trunk. Mount the pump/bracket assembly
by drilling two 1/4" holes in the spare tire
well using the bracket as a template.
1. Placement should be as close as possible to

the fuel tank while still providing access to
the mounting bolts with a socket.

G. From inside the trunk (not underneath), use a

grinder or a piece of course sandpaper to
remove the paint from around one of the holes
you just drilled. This will ensure a good
ground point that is not exposed to the ele-
ments.

H. From underneath the car, connect the pump

ground wire to this hole as you secure the
pump to the spare tire well using the supplied
fastening bolts. (See Fig. 5.2-f.)

Connect the wire from the relay to the pump
power terminal.

Fig. 5.2-f