Paxton Superchargers 4.6L SOHC Mustang GT User Manual

Page 18

P/N: 4809655

16AUG07 v1.0 96-03MusGT(4809655v1.0)

2-4

*** NOTE ***

The hose clamp screw head should be parallel to the

supercharger mounting base.

B. Locate the 1/8" x -4 x 90° oil feed fitting.

(See assembly

1019327.) Install the fitting

into the supercharger oil feed.

*** NOTE ***

Use only clean oil to seal this fitting. Teflon paste or

Teflon tape may become dislodged and plug the

supercharger oil feed.

A. Install the supercharger oil return line (see

assembly

1019328) to the supercharger drain

fitting and secure with the hose clamp provid-
ed.. (See Fig. 2

-a.)

Fig 2.1-a

C. Remove the drive belt from the alternator pul-

ley.

D. Install the supercharger into the main bracket,

while looping the drive belt around the super-
charger pulley. (See Fig. 2

-b.)

E. Install the six 3/8-16 x 1.25" bolts and wash-

ers. Tighten the supercharger mounting bolts.
Once the supercharger is installed, release the
belt tensioner and loop the belt back around
the alternator pulley.

*** NOTE ***

1996-1998 model year cars will require a coil bracket

and a different spacer. One of the 3/8-16 x 1.25" bolts

must be replaced by a 3/8-16 x 1.0" bolt to clear the

coil bracket.

Fig. 2.1-b

Fig. 2.1-c

2.1

SUPERCHARGER INSTALLATION

OIL FEED

FITTING

H. Install the spacer and coil mounting bracket

after installing the supercharger.