Ab c d – Paxton Superchargers 4.6L SOHC Mustang GT User Manual

Page 7

P/N: 4809655

16AUG07 v1.0 96-03MusGT(4809655v1.0)

1-1

Fig. 1.1-a

C. Contact the Paxton Service Department for a

Return Authorization Number. Send both the
ECM and supplied credit tag to Paxton using
the enclosed shipping box.

1.1

AIR INLET REMOVAL

A. Before the air intake assembly can be removed,

you must first disconnect the plastic crankcase
breather hose

(A) and air idle bypass hose (B).

Unplug the air temperature sensor

1996-2001

Models Only: (C) and mass air flow sensor

(D). (See Fig. 1.1-a.)

Begin the initial

preparation and disassembly process by
first disconnecting the negative side of the
battery if not already done.

1.0

ECM REMOVAL

A. Remove the passenger’s side front kick-panel

from the interior of the vehicle. Remove the
sound deadening material (if any) that is cov-
ering the ECM. Remove the plastic ECM
hold-down bracket.

B. Using a 10mm socket or wrench, remove the

harness and plug from the ECM (as you
loosen the bolt, the connector will slowly
release). Remove the ECM from the vehicle.

*** NOTE ***

Before removing the ECM, disconnect the positive

cable from the battery.