NEXCOM VMC 3000/ 3001 User Manual
Page 183
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
167
Appendix H: CAN Module Setup and Command
VMC 3000/4000 Series User Manual
#73
Selected Gear = data -125negative gear are reverse gears
00000000 = neutral
11111011 = park
#74
Current Gear=data-125
negative gear are reverse gears
00000000 = neutral
11111011 = park
#75
|
#76
Bellow Pressure Front Axle Left
Information of the pressure of the air suspension bellow at the left
side of the front axle
Pressure= ((BPFAL2*256)+BPFAL1)* 0.1 ,KPA
#75 BPFAL1
#76 BPFAL2
#77
|
#78
Bellow Pressure Front Axle Right
Information of the pressure of the air suspension bellow at the left
side of the front axle
Pressure= ((BPFAR2*256)+BPFAR1)* 0.1 ,KPA
#77 BPFAR1
#78 BPFAR2
#79
|
#80
Bellow Pressure Rear Axle Left
Information of the pressure of the air suspension bellow at the left
side of the front axle
Pressure= ((BPRAL2*256)+BPRAL1)* 0.1 ,KPA
#79 BPRAL1
#80 BPFAR2
#81
|
#82
Bellow Pressure Rear Axle Right
Information of the pressure of the air suspension bellow at the left
side of the
front axle
Pressure= ((BPRAR2*256)+BPRAR1)* 0.1 ,KPA
#81 BPRAL1
#82 BPFAR2
#83
|
#90
Driver’s Identification (Driver 1 & Driver 2 identification)
#83
#84
#85
#86
#87
#88
#89
#90
The driver ID is only available if a digital tachograph is present
#91
|
#92
Engine Fuel Rate (EFR). Amount of fuel consumed by engine per
liter of hour.
EFR=(EFR2*256+EFR1)* 0.05 , L/h
Data Range: 0 to 3,212.75 L/h
#91 EFR1
#92 EFR2
#93
|
#94
Engine Instantaneous Fuel Economy(EIFE). Current fuel economy at
current vehicle velocity.
EIFE=(EIFE2*256+EIFE1) / 512 , km/L
Data Range: 0 to 125.5 km/L
#95
|
#102
FMS Tell Tale Status
#95
#96
#97
#98
#99
#100
#101
#102
The Tell Tale Status information is derived from information
displayed to the
driver’s dashboard.
#95
Bit 3,2,1,0: Telltale Block ID
Bit 7,6,5,4: Telltale Status 1
1000 = off
1001 = Cond. Red
1010 = Cond. Yellow
1011 = Cond. Info
1100–1110 = Reserved
1111 = not available