NEXCOM VMC 3000/ 3001 - Manual (Page 160)

Copyright © 2012 NEXCOM International Co., Ltd. All rights reserved 144 VMC 3000/4000 Series User Manual
Appendix B: Vehicle Power Management Setup
Vehicle Power Management Setup
Startup and Shutdown Voltage Setting
2.
If the input voltage setting is 24V :
set the startup voltage to 23V and the shutdown voltage to 21V.
If the input voltage setting is 24V :
set the startup voltage to 24V and the shutdown voltage to 22V.
If the input voltage setting is 24V :
set the startup voltage to 25V and the shutdown voltage to 22V.
If the input voltage setting is 24V :
set the startup voltage to 25V and the shutdown voltage to 23V.
Advanced
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Startup,Shutdown Setting Power Management Configuration
** External +5V & +12V Power Setting **
External Power
** Startup & Shutdown Voltage Setting **
Input Voltage
Startup,Shutdown
**Delay Time Setting**
Power On Delay
Power Off Delay
[Turn Off Both]
24 V
[(11.5,10.5)/(23,21)]
(11.5,10.5)/(23,21)
(12.0,11.0)/(24,22)
(12.5,11.0)/(25,22)
(12.5,11.5)/(25,23)
Startup,Shutdown