Amt configuration, Intel amt, Intel amt setup prompt – NEXCOM NDiS OPS-M50 User Manual
Page 63: Bios hokey pressed, Mebx selection screen
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
48
NDiS OPS-M50 User Manual
Chapter 4: BIOS Setup
AMT Configuration
This section is used to configure the AMT function.
Save & Exit
Advanced
Chipset
Boot
Security
Main
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 America Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable/Disable Intel (R)
Active Management Technology
BIOS Extension.
Note : iAMT H/W is always
enabled.
This option just controls the
BIOS extension execution.
If enabled, this reuqires
additional firmware in the SPI
device
Intel AMT
Intel AMT Setup Prompt
BIOS Hotkey Pressed
MEBx Selection Screen
[Enabled]
[Enabled]
[Disabled]
[Disabled]
Intel AMT
Enables or disables the Intel® Active Management Technology BIOS
Extension function.
Intel AMT Setup Prompt
Enables or disables Intel AMT Setup prompt to wait for hot-key to enter
setup.
BIOS Hokey Pressed
Enables or disables BIOS hotkey press.
MEBx Selection Screen
Enables or disables MEBx selection screen