Intel igfx configuration, Primary igfx boot display, Secondary igfx boot display – NEXCOM NDiS OPS-M50 User Manual
Page 59
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
44
NDiS OPS-M50 User Manual
Chapter 4: BIOS Setup
INTEL IGFx Configuration
This section is used to configure the Intel IGFX Configuration.
Primary IGFx Boot Display
Select the vedio devoce which will be activated during POST. This has no
effect if external graphics present. Secondary boot display selection will
appear based on your selection. VGA modes will be supported only on
primery display.
Secondary IGFx Boot Display
Select secondary display device.
Chipset
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 America Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Graphics turbo IMOON current
values supported (14-31)
Intel IGFX Configuration
Primary IGFX Boot Display
Secondary IGFX Boot Display
[VBIOS Default]
[Disabled]