Pch-io configuration, Pch lan controller, Wake on lan enable – NEXCOM NDiS OPS-M50 User Manual
Page 61: Azalia, Azalia internal hdmi codec, Restore ac power loss
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
46
NDiS OPS-M50 User Manual
Chapter 4: BIOS Setup
PCH-IO Configuration
This section is used to configure the PCH-IO Configuration.
Chipset
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 America Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable/Disable onboard NIC.
PCH LAN Controller
Wake on LAN Enable
Azalia
Azalia internal HDMI code
Restore AC Power Loss
[Enabled]
[Disabled]
[Auto]
[Disabled]
[Power On]
PCH LAN Controller
Enables or disables onboard NIC.
Wake on LAN Enable
Enables or disables integrated LAN to wake the system.
Azalia
Control Detection of the Azalia device.
Disabled - Azalia will be unconditionally disabled.
Enabled - Azalia will be unconditionally disabled.
Auto - Azalia will be enabled if present, disabled otherwise.
Azalia internal HDMI codec
Enables or disables internal HDMI codec for Azalia.
Restore AC Power Loss
Select AC power state when power is re-applied after a power failure.