NEXCOM NDiS OPS-M50 - Manual (Page 57)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 42 NDiS OPS-M50 User Manual
Chapter 4: BIOS Setup
CPU Configuration
This section is used to configure the CPU. It will also display detected CPU
information.
Save & Exit Advanced Chipset Boot Security Main
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 America Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enabled for Windows XP and
Linux (OS optimized for
Hyper-Threading Technology)
and Disabled for other OS (OS
not optimized for
Hyper-Threading Technology).
When Disabled only one thread
poer enabled core is enabled.
CPU Configuration
Intel(R) Core(TM) i5-2515E CPU @ 2.50GHz
EMT64
Processor Speed
Processor Setpping
Microcode Revision
Processor Cores
Intel HT technology
Hyper-threading
Hardware Prefectcher
Intel Virtualization Technology
Supported
2500 MHz
206a7
15
2
Supported
[Enabled]
[Enabled]
[Disabled]
Hyper-Threading
Enable this field for Windows XP and Linux which are optimized for Hyper-
Threading technology. Select disabled for other OSes not optimized for
Hyper-Threading technology. When disabled, only one thread per enabled
core is enabled.
Hardware Prefetcher
Turns on or off the MLC streamer prefetcher.
Intel Virtualization Technology
When this field is set to Enabled, the VMM can utilize the additional hard-
ware capabilities provided by Vanderpool Technology.