Advanced, Cpu configuration, System agent (sa) configuration – NEXCOM NDiS OPS-M50 User Manual
Page 55: Sata configuration, Pch-io configuration, Thermal configuration, Anti-thefts configuration, Amt configuration, Usb configuration
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
40
NDiS OPS-M50 User Manual
Chapter 4: BIOS Setup
Advanced
The Advanced menu allows you to configure your system for basic opera-
tion. Some entries are defaults required by the system board, while others,
if enabled, will improve the performance of your system or let you set
some features according to your preference.
Setting incorrect field values may cause the system to malfunc tion.
Save & Exit
Boot
Security
Main
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 America Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
CPU Configuration Parameters
CPU Configuration
System Agent (SA) Configuration
SATA Configuration
PCH-IO Configuration
Anti-Theft configuration
AMT Configuration
USB Configuration
H/W Monitor
Super IO Configuration
H/W Monitor2
CPU Configuration
This section is used to configure the CPU. It will also display detected CPU
information.
System Agent (SA) Configuration
System Agent (SA) Parameters
SATA Configuration
This section is used to configure the SATA drives.
PCH-IO Configuration
PCH-IO parameters
Thermal Configuration
Configures the intelligent power sharing function.
Anti-Thefts Configuration
Configures the Intel® Anti-Theft Technology function.
AMT Configuration
Configures the AMT function.
USB Configuration
Configures the USB devices.
Advanced