Boot option, Compatibility support module (csm) configuration – NEXCOM NViS 5604-i5 User Manual

Page 72

NViS 5604 Series User Manual

Chapter 4: BIOS Setup

Exit

Advanced

H/W Monitor

Boot

Security

Main

←→: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Previous Values
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit

Sets the system boot order

Boot Option #1

Boot Option #2

[AHCI: Mini PCIeDOM 1ME]

[AHCI P1: WDC WD30EU...]

Boot Option

Boot Option #1 & Boot Option #2
Adjust the boot sequence of the system. Boot Option #1 is the first boot
device that the system will boot from, next will be Boot Option #2 and so
forth.

CSM

Enables or disables CSM. Enabled to launch the Compatibility Support

Module. Please do not disable unless a WHCK test is running. If Windows

8 64-bit is used and all the devices support UEFI, CSM may be disabled for

faster boot speed.
Launch PXE OpROM Policy

Enables or disables the boot option for legacy network devices.
Launch Storage OpROM Policy

Enables or disables the boot option for legacy storage devices.
Launch Video OpROM Policy

Enables or disables the boot option for legacy video devices.

Compatibility Support Module (CSM) Configuration

This section is used to configure the compatibility support module features.

Boot

←→: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit

Enable to launch the
Compatibility Support Module.

Please do not disable unless
you’re running a WHCK test. If

you are using Windows 8 64-bit
and all of your devices support
UEFI, you may also disable CSM
for faster boot speed.

CSM

Launch PXE OpROM policy

Launch Storage OpROM policy

Launch Video OpROM policy

[Enabled]

[Legacy only]

This manual is related to the following products:

NViS 5604-i7