Advanced, Cpu configuration, Intel – NEXCOM NViS 5604-i5 User Manual
Page 61
Copyright © 2014 NEXCOM International Co., Ltd. All Rights Reserved.
47
NViS 5604 Series User Manual
Chapter 4: BIOS Setup
Advanced
The Advanced menu allows you to configure your system for basic operation.
Some entries are defaults required by the system board, while others, if
enabled, will improve the performance of your system or let you set some
features according to your preference.
Setting incorrect field values may cause the system to
malfunction.
Exit
Advanced
H/W Monitor
Boot
Security
Main
Version 2.15.1234. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
←→: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Previous Values
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit
CPU Configuration Parameters
CPU Configuration
Chipset Configuration
Storage Configuration
Intel(R) Rapid Start Technology
Intel(R) Smart Connect Technology
AMT Configuration
Super IO Configuration
ACPI Configuration
USB Configuration
Voltage Configuration
UEFI Update Utility
Instant Flash
CPU Configuration
This section is used to configure the CPU.
Advanced
Version 2.15.1234. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
←→: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit
Intel Hyper Threading
Technology allows multiple
threads to run on each core, so
that the overall performance on
threaded software is improved.
Intel(R) Core(TM) i7-4770S CPU @ 3.10GHz
Max CPU Speed
Min CPU Speed
Processor Cores
Intel HT Technology
Intel VT-x Technology
Intel SMX Technology
64-bit
Intel Hyper Threading Technology
Active Processor Cores
CPU C States Support
Enhanced Halt State(C1E)
CPU C3 State Support
CPU C6 State Support
CPU C7 State Support
Package C State Support
Intel SpeedStep Technology
Intel Turbo Boost Technology
CPU Thermal Throttling
No-Execute Memory Protection
Intel Virtualization Technology
Hardware Prefetcher
Adjacent Cache Line Prefetch
3100 MHz
800 MHz
4
Supported
Supported
Supported
Supported
[Enabled]
[All]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
Intel
®
Hyper Threading Technology
Enable this field for OSes optimized for Hyper-Threading technology. Select
disabled for OSes not optimized for Hyper-Threading technology. When disabled,
only one thread per enabled core is enabled.
Active Processors Cores
Select the number of cores to enable in each processor package.
CPU C States Support
Enable CPU C States Support for power saving. It is recommended to
keep C3, C6 and C7 all enabled for better power saving.