NEXCOM NViS 5604-i5 User Manual

Page 68

NViS 5604 Series User Manual

Chapter 4: BIOS Setup

PS/2 Keyboard Power On
Enables or disables PS/2 keyboard to turn on the system from the power-
soft-off mode.

PCI Devices Power On
Enables or disables PCI devices to turn on the system from the power-soft-
off mode.

Wake From Onboard LAN 2
Enables or disables wake up from onboard LAN 2.

RTC Alarm Power On
Enables or disables real time clock (RTC) to power on the system.

USB Keyboard/Remote Power On
Enables or disables USB Keyboard/Remote to power on the system.

USB Mouse Power On
Enables or disables USB mouse to power on the system.

USB Controller

Enables or disables all the USB ports.

Intel

USB3.0 Mode

Enables or disables USB 3.0 mode.

Legacy USB Support

Enabled Enables Legacy USB.

Auto

Disables support for Legacy when no USB devices are connected.

Disabled Keeps USB devices available only for EFI applications.
Legacy USB 3.0 Support

Enables or disables legacy support for USB 3.0 devices.

USB Configuration

This section is used to configure the USB.

Advanced

←→: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit

Enable or disable all the USB
ports.

USB Controller

Intel USB3.0 Mode

Legacy USB Support

Legacy USB 3.0 Support

[Enabled]

[Smart Auto]

[Enabled]

This manual is related to the following products:

NViS 5604-i7