NEXCOM NViS 5604-i5 - Manual (Page 29)

Copyright © 2014 NEXCOM International Co., Ltd. All Rights Reserved. 15 NViS 5604 Series User Manual
Chapter 3: System Setup
Chapter 3: System Setup
Removing the Motherboard
CAUTION! CAUTION! CAUTION!
Prior to removing the motherboard, make sure the unit’s power
is off and disconnected from the power sources to prevent
electric shock or system damage.
To install a CPU, the motherboard must be removed first. Please follow the
instructions below to remove the motherboard.
1. Remove the two thumb screws on the back of the system.
2. Gently slide the side panels on each side outwards and remove them.
Right side
Left side