NEXCOM NViS 5604-i5 - Manual (Page 70)

Copyright © 2014 NEXCOM International Co., Ltd. All Rights Reserved. 56 NViS 5604 Series User Manual
Chapter 4: BIOS Setup
CHA_FAN1 Speed
Detects and displays CHA_FAN1 speed.
CPU Input Voltage
Detects and displays the CPU input voltage.
Vcore
Detects and displays the Vcore CPU voltage.
+ 3.30V
Detects and displays 3.3V voltage.
+ 5.00V
Detects and displays 5V voltage.
+ 12.00V
Detects and displays 12V voltage.
CPU_FAN1 Setting
Configures the speed of the CPU fan.
Target CPU Temperature & Target Fan Speed
Options to adjust the cpu fan speed. Target Fan Speed configures the speed
of the fan when the CPU temperature is below the target temperature.
CHA_FAN1 Setting
Configures the speed of the chassis fan.
Over Temperature Protection
Enables or disables Over Temperature Protection.
Case Open Feature
Enables or disables the case open detection feature.
H/W Monitor
This section is used to monitor hardware status such as temperature, fan
speed and voltages.
Exit Advanced H/W Monitor Boot Security Main
Version 2.15.1234. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
←→: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Previous Values
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit
Quiet Fan Function Control Hardware Health Event Monitoring
CPU Temperature
M/B Temperature
CPU_FAN1 Speed
CHA_FAN1 Speed
CPU Input Voltage
Vcore
+ 3.30V
+ 5.00V
+ 12.00V
CPU_FAN1 Setting
Target CPU Temperature
Target Fan Speed
CHA_FAN1 Setting
Over Temperature Protection
Case Open Feature
: 59 °C
: 38 °C
: 2556 RPM
: 1360 RPM
: +1.744 V
: +0.935 V
: +3.328 V
: +5.064 V
: +12.091 V
[Automatic mode]
[60 °C/140 °F]
[Level 3]
[Full On]
[Disabled]
[Disabled]
CPU Temperature
Detects and displays the current CPU temperature.
M/B Temperature
Detects and displays the current motherboard temperature.
CPU_FAN1 Speed
Detects and displays CPU_FAN1 speed.