NEXCOM APPC 1230T - Manual (Page 30)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 14
Chapter 1: Product Introduction
APPC 1230T/1231T/1235T/1530T/1531T/1730T/1731T/1930T/1931T User Manual
Rear Bottom Line-in
Used to connect an audio device as sound source.
Mic-in
Used to connect an external microphone.
Line-out
Used to connect a headphone or a speaker.
LAN 1 and LAN 2
Used to connect the system to a local area network. LAN1 supports Wake
up on LAN.
USB
Used to connect USB 2.0/1.1 devices.
COM 1 and COM 2
These COM ports support RS232/422/485 compatible series device by BIOS
setting.
COM1 of APPC 1230T/1235T/1530T/1730T/1930T supports 5V or RI by
Jumper setting.
COM2 of APPC 1230T/1235T/1530T/1730T/1930T supports 12V or RI by
Jumper setting.
APPC 1231T/1531T/1731T/1931T have 2.5kV isolated protection.
PS/2 KB/MS
Used to connect a PS/2 keyboard and a PS/2 mouse
Reset Button
Press this button to restart the system.
VGA
Used to connect an analog VGA monitor.
12V-30V DC Input
Used to plug a DC power cord.
LAN 1
VGA 12V-30V
DC Input
Mic-in Mic-in
LAN 2
COM 1
PS/2 KB/MS
Reset
Line-out Line-in COM 2 USB