NEXCOM APPC 1230T - Manual (Page 116)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 100 APPC 1230T/1231T/1235T/1530T/1531T/1730T/1731T/1930T/1931T User Manual
Chapter 4: BIOS Setup
Intel® IGD Configuration
This section is used to configure the Intel® IGD Graphic configurations.
Save & Exit Advanced Chipset Boot Security Main
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 America Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Select the Video Device
Which will be activated
during POST.
This has no effect if
external graphics present.
Intel IGD Configuration
IGFX - Boot Type
LCD Panel Type
Backlight Control Select
Backlight On/Off Reverse
Backlight Dimming Control Select
Backlight
Fixed Graphics Memory Size
[LVDS]
1280x1024 (19inch)
[Pyroelectric sensor]
[Normal]
[Manual]
[100%]
[128MB]
IGFX – Boot Type
This field is used to configure which video device will be activated during
POST. This has no effect if external graphics present. The options are CRT,
LVDS, LVDS + CRT and CRT + HDMI.
Backlight Control Select
The available options are Pyroelectric sensor and Tact Switch. The default
setting is Tact Switch for APPC 1231T/APPC 1531T/APPC 1731T/APPC
1931T, and the Backlight On/Off button is functional only in this mode.
IGFX - Boot Type
CRT
LVDS
LVDS + CRT
CRT + HDMI
Backlight On/Off Reverse
Please configure this option only when changing the panel, otherwise the
display may not work.
Backlight Dimming Control Select
The options are Tact Switch, Manual and Light sensor.
The default setting is Manual for APPC 1230T/1235T/1530T/1730T/1930T
and the Backlight option below will be configurable.
The default setting is Tact Switch for 1231T/1531T/1731T/1931T and the
Backlight option below will not be configurable, please use the brightness
button on the panel to adjust it.
Backlight
Adjusts the brightness of the backlight.
Fixed Graphics Memory Size
This field is used to configure the memory size of the fixed graphics, the
options are 128MB and 256MB.