NEXCOM APPC 1230T - Manual (Page 108)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 92 APPC 1230T/1231T/1235T/1530T/1531T/1730T/1731T/1930T/1931T User Manual
Chapter 4: BIOS Setup
IDE Configuration
This section is used to configure the IDE devices.
Configure SATA as
Configures the SATA as IDE or AHCI mode.
IDE
AHCI
This option configures the Serial ATA drives as Parallel ATA physical
storage device.
This option configures the Serial ATA drives to use AHCI (Advanced
Host Controller Interface). AHCI allows the storage driver to enable
the advanced Serial ATA features which will increase storage
performance.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Select a configuraton for SATS
Controller SATA Port0
SATA Port1
SATA Controller(s)
Configure SATA as
Not Present
Not Present
[Enabled]
[AHCI]
Configure SATA as
IDE
AHCI
SATA Controller(s)
Enables or disables SATA controller.