beautypg.com

Specifications – NEXCOM APPC 1230T User Manual

Page 27

background image

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.

11

Chapter 1: Product Introduction

APPC 1230T/1231T/1235T/1530T/1531T/1730T/1731T/1930T/1931T User Manual

Specifications

Panel

▪ LED Size: 19”, 4:3

▪ Resolution: SXGA 1280x1024

▪ Luminance: 350cd/m2

▪ Contrast ratio: 1000

▪ LCD color: 16.7M

▪ Viewing Angle: 80(U), 80(D), 85(L), 85(R)

▪ Backlight: LED

Touch Screen

▪ 5-wire resistive (flush panel type)

▪ Light transmission: 81%

▪ Interface: USB

System

▪ CPU: On-board Intel® Atom™ Dual Core processor D2550, 1.86GHz,

1M L2 Cache

▪ BIOS: AMI BIOS

▪ System chipset: Intel® NM10 Express chipset

▪ System memory: 2x 204-pin DDR3 SO-DIMM socket, 1G DDR3 (Default),

support up to 4GB DDR3-800/1066, Non-ECC and un-buffered

▪ Storage Device:

– 1x external locked CFast socket

– 1x hard drive bay: optional 1x 2.5” SATA HDD or 1x SATA DOM

▪ Watchdog timer: Watchdog timeout can be programmed by
software from 1 second to 255 seconds and from 1 minute to 255
minutes (Tolerance 15% under room temperature 25

°C)

▪ H/W status monitor: Monitoring system temperature, and voltage

▪ Expansion: 2x mini-PCIe sockets
(support optional WiFi or 3.5G module)

▪ Panel backlight control button: Increase brightness / decrease
brightness / Backlight On/Off (For APPC1931T only)

Rear I/O

▪ Ethernet: 2x RJ45

▪ 2nd display VGA port: 1x DB15

▪ Audio port: 1x Line out; 1x Line in; 1x MIC-in

▪ USB: 4x USB 2.0

▪ PS2 keyboard/ mouse

▪ Power switch

▪ Reset button

▪ COM #1: RS232/422/485 w/RI or 5V selection

▪ COM #2: RS232/422/485 w/RI or 12V selection

For APPC1931T only

▪ DIO w/ 2.5kv isolated:

4x Digital Input (Source type)

– Input Voltage (Dry Contact): Logic 0: Close to GND

– Logic 1: Open

– Input Voltage: Logic 0: 3V max

– Logic 1: +5V ~ +30V
4x Digital Output (Sink type)

– Output Voltage: 3.6V ~ 5V

– Sink current: 200 mA max. per channel

This manual is related to the following products: