Appendix c: watchdog programming guide – NEXCOM APPC 1230T User Manual
Page 126
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
110
APPC 1230T/1231T/1235T/1530T/1531T/1730T/1731T/1930T/1931T User Manual
Appendix C: Watchdog Programming Guide
Appendix C: Watchdog Programming Guide
APPC Series Watch Dog Function Configuration Sequence Description:
Start
Step1. See “SetupWDT” procedure
#Setup Watchdog Timer Environment
Step2. See “TimeBaseWDT” procedure
#Initial Watchdog Timer.
Users can select second or minute.
Step3. See “TimeCountWDT” procedure
#Set Watchdog Timer Time-out Value.
Users can set time-out value.
Step4: See ExitSetup procedure
#Exit Setup Environment
End
This manual is related to the following products: