NEXCOM APPC 1230T - Manual (Page 114)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 98 APPC 1230T/1231T/1235T/1530T/1531T/1730T/1731T/1930T/1931T User Manual
Chapter 4: BIOS Setup
Onboard Serial Port Max Baud Rate
This field configures the maximum baud rate of the serial port 3, the options
are 115200 bps and 921600 bps.
Save & Exit Advanced Chipset Boot Security Main
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Change the Serial Port Max Baud
Rate. Select <115200 bps> or
<921600 bps>
Serial Port 3 Configuration
Serial Port
Device Settings
Change Settings
Onboard Serial Port Max Baud Rate
[Enabled]
IO=2E8H; IRQ=6;
[IO=2E8H; IRQ=6;]
[115200 bps]
Onboard Serial Port Max Baud Rate
115200 bps
921600 bps
Save & Exit Advanced Chipset Boot Security Main
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Pc Health Status
CPU Temperature
System Temperature
CPU:Vcore
+3.3V
+5V
+12V
: +39 C
: +39 C
: +1.168 V
: +3.328 V
: +5.017 V
: +11.827 V
H/W Monitor
This section is used to configure the hardware temperature, fan speed and
voltages.