NEXCOM nTUF 600 - Manual (Page 95)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 81 nTUF 600 User Manual
Chapter 4: BIOS Setup
Security Advanced Boot Chipset PCIPnP Main
v02.61 (C) Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
← Select Screen
↑↓ Select Item
+/- Change Field
Tab Select Field
F1 General Help
F10 Save & Exit
ESC Exit
Exit system setup after saving
the changes.
F10 key can be used for this
operation.
Exit Options
Save Changes and Exit
Discard Changes and Exit
Discard Changes
Load Optimal Defaults
Load Failsafe Defaults
Exit
Exit
Save Changes and Exit
To save the changes and exit the Setup utility, select this field then press
. A dialog box will appear. Confirm by selecting Yes. You can also
press to save and exit Setup.
Discard Changes and Exit
To exit the Setup utility without saving the changes, select this field then
press . You may be prompted to confirm again before exiting. You
can also press to exit without saving the changes.
Discard Changes
To discard the changes, select this field then press . A dialog box will
appear. Confirm by selecting Yes to discard all changes made and restore
the previously saved settings.
Load Optimal Defaults
Loads the optimal default values from the BIOS ROM.
Load Failsafe Defaults
Loads the fail-safe default values from the BIOS ROM.