Boot device priority – NEXCOM nTUF 600 User Manual

Page 90

nTUF 600 User Manual

Chapter 4: BIOS Setup

Bootup Num-Lock
This allows you to determine the default state of the numeric keypad. By
default, the system boots up with NumLock on wherein the function of the
numeric keypad is the number keys. When set to Off, the function of the
numeric keypad is the arrow keys.

PS/2 Mouse Support
The options are Auto, Enabled and Disabled.

System Keyboard
Detects the system keyboard.

Hit ‘DEL’ Message Display
When enabled, the system displays the “Press DEL to run Setup” message
during POST.

Interrupt 19 Capture
When enabled, it allows the optional ROM to trap interrupt 19.

Exit

Advanced

Boot

PCIPnP

Security

Main

BIOS SETUP UTILITY

←

Select Screen

↑↓

Select Item

+/-

Change Field

Tab

Select Field

General Help

F10

Save & Exit

ESC

Exit

Specifies the boot sequence from
the available devices.

A device enclosed in
parenthesis has been disabled in
the corresponding type menu.

Boot Device Priority

1st Boot Device

2nd Boot Device

[USB:USB Hotplug FDD]

[SATA:PM-TS64GSSD25]

1st Boot Device to 2nd Boot Device
Selects the drive to boot first, and second in the “1st Boot Device” and “2nd
Boot Device” fields respectively. The BIOS will boot the operating system
according to the sequence of the drive selected.

Boot Device Priority

This section is used to select the boot priority sequence of the devices.