Chipset, North bridge configuration – NEXCOM nTUF 600 User Manual
Page 91
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
77
nTUF 600 User Manual
Chapter 4: BIOS Setup
Security
Advanced
Boot
Chipset
PCIPnP
Main
v02.61 (C) Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
←
Select Screen
↑↓
Select Item
+/-
Change Field
Tab
Select Field
F1
General Help
F10
Save & Exit
ESC
Exit
Configure North Bridge features.
Advanced Chipset Settings
WARNING: Setting wrong values in below sections may cause
system to malfunction.
► North Bridge Configuration
► South Bridge Configuration
Chipset
This section is used to configure the system based on the specific features
of the chipset.
Exit
Security
Advanced
Boot
Chipset
PCIPnP
Main
v02.61 (C) Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
←
Select Screen
↑↓
Select Item
+/-
Change Field
Tab
Select Field
F1
General Help
F10
Save & Exit
ESC
Exit
Fixed Mode
DVMT Mode
Advanced Chipset Settings
PCI MMIO Allocation: 4GB to 3072MB
Initate Graphic Adapter
[MXM/IGD]
Internal Graphics Mode Select
[Enabled, 8MB]
PEG Port Configuration
DVMT Mode Select
[DVMT Mode]
DVMT/FIXED Memory
[256MB]
Boot Display Device
[CRT]
Exit
Options
North Bridge Configuration
This section is used to configure the north bridge features.
DVMT Mode Select
The options are Fixed mode and DVMT mode.
DVMT/Fixed Memory
This field is used to select the graphics memory size used by DVMT/Fixed
mode.